Late fall is the last easy window to deal with gutters and roofs before snow and ice arrive. Most of this checklist is looking, not climbing. If a job needs a ladder or a roof, it’s a good one to hand to a professional.
Gutters and downspouts
- Clear them after the leaves are down. Gutters packed with leaves hold water, which freezes and adds weight.
- Check that downspouts run freely and send water away from the foundation, not onto a walkway that will turn to ice.
- Look for sagging sections and loose hangers. A gutter that pulls away from the fascia is easier to fix now than in February.
- Watch for overflow in the next heavy rain. Water spilling over the front edge usually means a blockage or a gutter that has lost its slope.
The roof, from the ground
- Scan for missing, lifted or cracked shingles and for damaged flashing around chimneys, vents and skylights. Binoculars help.
- Note any moss or debris collecting in valleys, where water is meant to run off.
- Check the attic on a bright day. Daylight through the roof boards, damp insulation or water stains are worth a closer look.
Icicles and ice dams
Big icicles and ridges of ice along the eaves usually mean heat is escaping into the attic. The University of Minnesota Extension explains that warm air leaking from the house melts snow on the upper roof; the water runs down and refreezes at the colder edge, where it can back up under shingles. Our guide on ice dams in Maine covers what to do about them.
- Air sealing comes first. The Extension’s first long-term step is making the ceiling airtight, then adding insulation.
- During the winter, clearing snow from the lower edge of the roof with a roof rake from the ground is safer than going up on an icy roof, though the Extension cautions that raking can damage roofing.
Insulation and air sealing may qualify for Efficiency Maine rebates and loans, which change over time. Check its current offers before you start.
When to call a professional
Call a roofer or gutter installer for anything on a ladder above the first floor, damaged flashing, or leaks you can see inside. An insulation and weatherization contractor can find where air is leaking and plan the work.